How to Remove FRP on SPD device

In this tutorial, we have shared Easy, step-by-step, Instructions that how you can remove FRP (factory reset protection) from any android SPD (Spreadtrum) device using the Android Fastboot Reset Tool.

Things You’ll Need:

• • A Windows PC
  • Android Fastboot Reset Tool.
  • SPD Android Phone
  • Installed USB Drivers of ADB and Fastboot Mode

Remove FRP on SPD device (SpreadTrum)

Step 1: Download the Android Fastboot Reset Tool and Extract downloaded zip files on your Computer. After Extracting, you will be able to see the following files:

Step 2: Turn off your device, and you have to open it into Fastboot Mode by pressing the Volume Up + Power Key or Volume Down + Power Key. If it did not work, then follow the next guide to boot android SPD chipset device in Fastboot Mode.

Follow these steps to enter Fastboot Mode:
1. Power off your device
2. Press and hold Power + Volume Down or Power+ Volume Up key until the screen light up4. Select reboot to bootloader
Now you have successfully entered into fastboot mode.
Step 3: Now, connect your phone to the Computer using a USB cable.
Step 4: Open Android Fastboot Reset tool.

Step 5: At this point, Enter 9 to remove SPD FRP from your device and press enter from the keyboard.

Step 6: Now, it will detect your device and will proceed further with FRP removing commands, and your device will automatically reboot.

Congratulations, you have now successfully removed FRP lock from your Android SPD device.