Information: In this tutorial, you will learn how to remove FRP (Factory Reset Protection) on Lava Z50 Android Phone using the SP Flash Tool on Computer.
Things You Will Need for this Guide:
- A Windows PC
- Download and Install MTK USB VCOM driver on your Computer.
- Download Lava Z50 FRP Remove files.
- Download Smart Phone Flash Tool (SP Flash Tool)
- Your device should have a battery backup of more than 40% will be good enough.
Remove FRP in Lava Z50 Using SP Flash Tool
Step 1: Download and Install MTK USB VCOM driver on your Computer. If the driver already installed in your computer, skip this step.
Step 2: Download Lava Z50 FRP remove files and Extract zip files on your Computer.
Step 3: Download the latest version of SP Flash Tool and Extract downloaded zip files on your computer and then open the SP Flash Tool.
Step 4: In Download-Agent tab click on the choose button and Select Download Agent file DA_SWSEC.bin from downloaded SP Flash Tool folder.
Step 5: Now, in Scatter-loading tab click on the choose button and Select MT6737M_Android_scatter.txt from downloaded FRP files folder.
Step 6: Now, Click on the Format Tab.
Step 7: Now under format Tab select Manual Format Flash.
Step 8: Now Enter the parameters as follow:
Begin Address [HEX] : 0x6a00000
Format length [HEX]: 0x100000 and then click on the Start button to continue the Process of remove FRP in Lava Z50.
Turn Off Your Phone and Connect to the Computer
Step 9: Now, Connect your phone in Switched off mode to the Computer with a USB cable while holding boot key (Volume up + Power or Volume Down + Power) and wait for it to get recognised.
Once the Computer detects your device, you will be able to see a progress bar that will run at the bottom of the SP Flash Tool window, and it will take around 30 to 40 seconds to complete the process. After the process completed, you will see a Green indicate screen “Download OK it means that you have successfully remove FRP in Lava Z50 Android Phone using the SP Flash Tool
Congratulation, You have now successfully remove FRP in Lava Z50 Android Phone, now close the SP Flash Tool window and disconnect your device to the computer.
Now turn on your Smartphone; it will not ask any previous account.