Information: In this tutorial, we’ll show you how to remove or bypass FRP Lock in Tecno in1 Smartphone using the SP Flash Tool on Windows Computer.
Things You Will Need for this Guide:
- A Windows PC
Download and Install MTK USB VCOM driver on your Computer.
- Download Tecno in1 FRP Files
- Download Smart Phone Flash Tool (SP Flash Tool)
- Your device should have a battery backup of more than 40% will be good enough.
Remove FRP Lock in Tecno in1 Smartphone
Step 1: Download and Install MTK USB VCOM driver on your Computer. If the driver already installed in your Computer, skip this step.
Step 2: Download Tecno in1 FRP Files and Extract the zip file on your Computer.
Step 3: Download the latest version of SP Flash Tool and Extract downloaded zip files on your Computer and then open the SP Flash Tool.
Step 4: In Download-Agent tab click on the choose button and Select Download Agent file Tecno IN1 DA.bin from downloaded FRP files folder.
Step 5: Now, in Scatter-loading tab click on the choose button and Select MT6739_Android_scatter.txt from downloaded FRP files folder.
Step 6: Go to Format Tab of SP Flash Tool.
Step 7: Under format Tab, Select Manual Format Flash.
Step 8: Now Enter the following parameters:
Begin Address [HEX]: 0x2d88000
Format Length [HEX]: 0x100000 and then click on the Start tab to continue the FRP process.
Step 9: At this Point connect your phone with the Computer using a USB cable (Phone must be switched off). Press Volume Up or Volume Down button in your phone to get detected by the SP Flash tool.
Once the Computer detects your Smartphone, then you will be able to see a progress bar that will run at the bottom of the SP Flash Tool and it will take around 30 to 40 seconds to complete the process. After the process completed, you will see a Green indicate Download OK it means that you have successfully unlocked FRP Lock in Tecno in1 Smartphone.
Step 10: Now disconnect your device to the computer and turn it on, You have Successfully unlocked FRP Lock.